(727) 808-8602

Home Latest New Products Customers' Rides Orders, Terms and Conditions
What a crank-scraper is and other technical info... Some comments on our products...
 
Alfa-Romeo, AMC, BMC, BMW, Buick, Buick-Rover, Cadillac, Chevrolet, Chrysler/Mopar, Datsun-Nissan, Fiat-Lancia, Ford, GM, Honda/Acura, IHC, Jaguar, Lotus, Mazda, Mercedes, MGA/MGB, Mitsubishi, Oldsmobile, Opel, Pontiac, Porsche, Renault, SAAB, Studebaker, Suzuki-Geo, Toyota, Triumph, VW, Volvo

We will try to keep this list updated but if you do not see your engine listed here please ask!  We can provide plastic templates for initial fitting and adjustment. Plastic templates cost $100 and are a separate charge from the scraper pattern chosen.

We have included some representative pictures of the scrapers we make.  If you would like to see a picture of a particular scraper please ask -- we would be more than happy to send one through.

When available (please enquire) our zero-clearance Teflon® scrapers run an additional $130.00 to the cost of the standard steel scraper unless noted.

Remember, your vehicle may have an engine made by a different manufacturer so check both product lines.  If you are still unsure, please contact us.

Datsun/Nissan

 

Please note that the Z22 and Z24 blocks are different castings internally to the L18 or L20B.  If you are using a Z22 or Z24 crank in an L18 or L20B go to that section.

Please specify if you are using the Z22 or Z24 crankshaft for the patterns below.

Dual scrapers that work on both the upstroke and downstroke of the engine only $84.95; Teflon® version $214.95:

steel version

Teflon® bladed version

Copyright 2002-2017 © All rights are reserved on our product designs -- a great deal of hard work goes into each one.

Teflon® is a registered trade mark of E.I. du Pont de Nemours and Company. Only DuPont makes Teflon® resin sourced by Ishihara-Johnson Crank Scrapers from authorized DuPont licensees.

We Ship World Wide!

Jean-Claude 1919-2003
A good friend.