(727) 808-8602
Home Latest New Products Customers' Rides Orders, Terms and Conditions
What a crank-scraper is and other technical info... Some comments on our products...
 
Alfa-Romeo,AMC,BMC,BMW,Buick,Buick-Rover,Cadillac,Chevrolet,Chrysler/Mopar,Datsun-Nissan,Fiat-Lancia,Ford,GM,Honda/Acura,IHC,Jaguar,Lotus,Mazda,Mercedes,MGA/MGB,Mitsubishi,Oldsmobile,Opel,Pontiac,Porsche,Renault,Studebaker,Suzuki-Geo,Toyota,Triumph,VW,Volvo

We will try to keep this list updated but if you do not see your engine listed here please ask!  We can  do custom stroker or knife-edge crank designs.  We can provide templates for initial fitting and adjustment. Templates cost $100 and are a separate charge from the scraper pattern chosen.

We have included some representative pictures of the scrapers we make.  If you would like to see a picture of a particular scraper please ask -- we would be more than happy to send one through.

When available (please enquire) our zero-clearance Teflon® scrapers run an additional $130.00 to the cost of the standard steel scraper unless noted.

Remember, your vehicle may have an engine made by a different manufacturer so check both product lines.  If you are still unsure, please contact us.

crankscraper, crank-scraper, crank-scrapper, crank, crankshaft, rod-bearing, main-bearing, connecting-rod, counterweight, piston, windage, windage-tray, windage-cloud, oil pan, oil-pan, oil-aeration, oil-foaming, oil-cloud, racing, drag racing, road racing, drag-race, road-race, road-course, drift, drifting, time-trial, performance, power, horsepower, HP, torque, TQ, friction, vacuum, economy, engine, motor

 

Chevrolet

 

 Copyright 2002-2024 © All rights are reserved on our product designs.

90 degree V6 4.3 (also Vortec) $94.95

Teflon version available

 

Windage tray

2wd version shown; 4wd version available as well

This tray easily installs over the existing tray/baffle in the sump.  The existing bolts are replaced by provided studs. washers and nuts.

$314.95

Here are some pics of the 4-wheel drive version; please note that the four wheel drive version requires drilling two holes in the floor of the pan and some light grinding/finishing.  These two points are additional anchors for the tray:

  

Copyright 2002-2024 © All rights are reserved on our product designs -- a great deal of hard work goes into each one.

Teflon® is a registered trade mark of E.I. du Pont de Nemours and Company. Only DuPont makes Teflon® resin sourced by Ishihara-Johnson Crank Scrapers from authorized DuPont licensees.

We Ship World Wide!

Jean-Claude 1919-2003
A good friend.