(727) 808-8602

Home Latest New Products Customers' Rides Orders, Terms and Conditions
What a crank-scraper is and other technical info... Some comments on our products...
 
Alfa-Romeo,AMC,BMC,BMW,Buick,Buick-Rover,Cadillac,Chevrolet,Chrysler/Mopar,Datsun-Nissan,Fiat-Lancia,Ford,GM,Honda/Acura,IHC,Jaguar,Lotus,Mazda,Mercedes,MGA/MGB,Mitsubishi,Oldsmobile,Opel,Pontiac,Porsche,Renault,Studebaker,Suzuki-Geo,Toyota,Triumph,VW,Volvo

We will try to keep this list updated but if you do not see your engine listed here please ask!  We can provide plastic templates for initial fitting and adjustment. Plastic templates cost $100 and are a separate charge from the scraper pattern chosen.

We have included some representative pictures of the scrapers we make.  If you would like to see a picture of a particular scraper please ask -- we would be more than happy to send one through.

When available (please enquire) our zero-clearance Teflon® scrapers run an additional $130.00 to the cost of the standard steel scraper unless noted.

Remember, your vehicle may have an engine made by a different manufacturer so check both product lines.  If you are still unsure, please contact us.

Datsun/Nissan

 

A10 through A15 -- please specify stroke

A-series crank scrapers in steel and Teflon® versions 59mm through 82mm strokes -- please specify engine and stroke. $69.95 in steel; add $100 for Teflon®

General A-series windage tray: $199.95  Please note that the scraper is sold separately.

Here is a picture of the tray installed alone -- there are two mounting tabs provided for the tray supports:

Baffles for the A-series type oil front sump pan.  There is a replacement baffle for the sump but with trap doors.  The one in the pan measured had two attachment points that were cracked and broken.  The replacement is made from heavier gauge steel.  Also included is an anti-surge baffle with a trap door leading to the rear of the pan.  Both of these baffles are to be welded or brazed into place.  $109.95

 

Copyright 2002-2017 © All rights are reserved on our product designs -- a great deal of hard work goes into each one.

Teflon® is a registered trade mark of E.I. du Pont de Nemours and Company. Only DuPont makes Teflon® resin sourced by Ishihara-Johnson Crank Scrapers from authorized DuPont licensees.

We Ship World Wide!

 

Jean-Claude 1919-2003
A good friend.