(727) 808-8602
Home Latest New Products Customers' Rides Orders, Terms and Conditions
What a crank-scraper is and other technical info... Some comments on our products...
 
Alfa-Romeo,AMC,BMC,BMW,Buick,Buick-Rover,Cadillac,Chevrolet,Chrysler/Mopar,Datsun-Nissan,Fiat-Lancia,Ford,GM,Honda/Acura,IHC,Jaguar,Lotus,Mazda,Mercedes,MGA/MGB,Mitsubishi,Oldsmobile,Opel,Pontiac,Porsche,Renault,Studebaker,Suzuki-Geo,Toyota,Triumph,VW,Volvo

We will try to keep this list updated but if you do not see your engine listed here please ask!  We can provide templates for initial fitting and adjustment. Templates cost $100 and are a separate charge from the scraper pattern chosen.

We have included some representative pictures of the scrapers we make.  If you would like to see a picture of a particular scraper please ask -- we would be more than happy to send one through.

When available (please enquire) our zero-clearance Teflon® scrapers run an additional $130.00 to the cost of the standard steel scraper unless noted.

Remember, your vehicle may have an engine made by a different manufacturer so check both product lines.  If you are still unsure, please contact us.

crankscraper, crank-scraper, crank-scrapper, crank, crankshaft, rod-bearing, main-bearing, connecting-rod, counterweight, piston, windage, windage-tray, windage-cloud, oil pan, oil-pan, oil-aeration, oil-foaming, oil-cloud, racing, drag racing, road racing, drag-race, road-race, road-course, drift, drifting, time-trial, performance, power, horsepower, HP, torque, TQ, friction, vacuum, economy, engine, motor

 

Ford

 

Copyright 2002-2024 © All rights are reserved on our product designs.

V8: FE engines 390, 410, 427, 428  -- be sure to specify engine as there are different strokes.  The updated design now has a dual scraper that works on the downstroke.  $94.95

  

Teflon® bladed version: $224.95 (shows relief on secondary scraper for cross bolted mains) 

for Shelby aluminum block stroker

NEW: Modified Milodon windage tray.  Directional screening is added to create a dual level tray.  Drains are added to allow the tray to work in harmony with our scraper (separate piece).  Windage tray core is a separate cost.    $264.95

Modified tray shown with steel scraper for stock 390:

Steel scraper for use with the cross-bolted Robert Pond Motorsports aluminum block and modified Milodon windage tray:

Copyright 2002-2024 © All rights are reserved on our product designs -- a great deal of hard work goes into each one.

Teflon® is a registered trade mark of E.I. du Pont de Nemours and Company. Only DuPont makes Teflon® resin sourced by Ishihara-Johnson Crank Scrapers from authorized DuPont licensees.

We Ship World Wide!

Jean-Claude 1919-2003
A good friend.